Now there is another issue here, if your computer recognizes smaller or lower memory SD cards such as 1 GB or 2GB but fails to read a 4 GB, 8 GB or higher SDHC Card then your computer’s internal reader is not SDHC compliant. Initially, SD card was only able to have a maximum of 2 GB capacity but later on SDHC specificated was developed to increase the capacity of SD cards to 32 or 64 GB capacity. Computers purchased before 2008 may not be SDHC compatible.
Another case is where your SD card is recognized by PC but when you go to File Explorer there is no drive showing the SD card which basically means your PC has failed to recognize the SD card. So without wasting any time let’s see how to actually Fix SD Card not Recognized by PC with the help of below-listed troubleshooting guide.
Make sure of the following things before trying the below steps:
1.Try to remove dust from your SD Card Reader and also clean your SD Card.
Make sure of the following things before trying the below steps:Fix SD Card not Recognized by PCMethod 1: Disable and Re-enable SD cardMethod 2: Change SD Card Drive LetterMethod 3: Save BIOS to default configurationMethod 4: Update SD Card DriversMethod 5: Uninstall your SD card reader
2.Check your SD card is working on another PC which will make sure it’s not faulty.
3.See if some other SD card is working properly or not.
4.Make sure the SD card is not locked, slide the switch to the bottom to unlock it.
5.The last thing is to check if your SD card is broken, in which case no SD or SDHC card will work and the below-listed steps won’t fix it.
Fix SD Card not Recognized by PC
Make sure to create a restore point just in case something goes wrong.
Method 1: Disable and Re-enable SD card
1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.
2.Expand SD Host Adapters or Memory Technology Devices under which you will see your device Realtek PCI-E Card reader.
3.Right-click on it and select Disable, it will ask for confirmation select Yes to continue.
4.Again right-click and select Enable.
5.This will definitely fix SD Card not Recognized by PC issue, if not then again go to device manager.
6.This time expand portable devices then right-click on your SD card device letter and select Disable.
7.Again right-click and select Enable.
Method 2: Change SD Card Drive Letter
1.Press Windows Key + R then type diskmgmt.msc and hit Enter.
2.Now right-click on your SD card and select Change Drive Letter and Paths.
3.Now in the next window click on Change button.
4.Then from the drop-down select any alphabet except the current one and click OK.
5.This alphabet will be the new drive letter for SD Card.
6.Again see if you’re able to Fix SD Card not Recognized by PC issue or not.
Method 3: Save BIOS to default configuration
1.Turn off your laptop, then turn it on and simultaneously press F2, DEL or F12 (depending on your manufacturer) to enter into BIOS setup.
2.Now you’ll need to find the reset option to load the default configuration and it may be named as Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar.
3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS will now use its default settings.
4.Again try to log in with the last password you remember into your PC.
Method 4: Update SD Card Drivers
1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.
2.Expand SD host adapters or Disk Drives then right-click on your SD Card and select Update Driver.
3.Then choose Search automatically for updated driver software.
4.Reboot your PC to save changes. If the problem still persists then follow the next step.
5.Again select Update Driver Software but this time choose ‘Browse my computer for driver software.‘
6.Next, at the bottom click ‘Let me pick from a list of available drivers on my computer.‘
7.Select the latest driver from the list and click Next.
8.Let the Windows install drivers and once complete close everything.
9.Reboot your PC to save changes and you may be able to Fix SD Card not Recognized by PC issue.
Method 5: Uninstall your SD card reader
1.Press Windows Key + R then type “devmgmt.msc” and hit Enter to open Device Manager.
2.Expand SD host adapters or Disk Drives then right-click on your SD Card and select Uninstall.
3.If asked for confirmation select Yes.
4.Reboot to save changes and Windows will automatically install the default drivers for the USB.
Recommended for you:
Fix CD or DVD Drive Error Code 39 Fix The exception unknown software exception (0xe0434352) How To Fix USB Not Working Error Code 39 Fix DVD/CD Rom Error Code 19 on Windows 10
That’s it you have successfully Fix SD Card not Recognized by PC but if you still have any queries regarding this guide then feel free to ask them in the comment’s section.
