Don’t worry; a troubleshooter is here to get to the bottom of this problem and fix it via the below-listed methods. If your system sleeps after 2-3 minutes of inactivity, then our troubleshooting guide will definitely resolve your issue in no time.

Fix Windows 10 Sleeps after few minutes of Inactivity

Make sure to create a restore point just in case something goes wrong.

Fix Windows 10 Sleeps after few minutes of InactivityMethod 1: Reset your BIOS configuration to defaultMethod 2: Restore Power SettingsMethod 3: Registry FixMethod 4: Change Screen Saver TimeMethod 5: Use PowerCfg. exe utility to configure display timeout

Method 1: Reset your BIOS configuration to default

  1. Turn off your laptop, then turn it on and simultaneously press F2, DEL or F12 (depending on your manufacturer) to enter into BIOS setup.

  2. Now you’ll need to find the reset option to load the default configuration, and it may be named Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar.

  3. Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS will now use its default settings.

  4. Once you’re logged into Windows see if you’re able to Fix Windows 10 Sleeps after few minutes of inactivity.

Method 2: Restore Power Settings

  1. Press Windows Key + I to open Windows Settings then select System.

  2. Then select Power & sleep in the left-hand menu and click Additional power settings.

  3. Now again from the left-hand side menu, click “Choose when to turn off the display.”

  4. Then click Restore default settings for this plan.

  5. If asked for confirmation, select Yes to continue.

  6. Reboot your PC, and your problem are fixed.

Method 3: Registry Fix

  1. Press Windows Key + R then type “regedit” (without quotes) and hit Enter.

  2. Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\238C9FA8-0AAD-41ED-83F4-97BE242C8F20\7bc4a2f9-d8fc-4469-b07b-33eb785aaca0

  1. In the right window pane double click on Attributes to modify its value.

  2. Now enter the number 2 in the Value data field.

  3. Next, right-click on the power icon on the system tray and select Power Options.

  4. Click Change plan settings under your chosen power plan.

  5. Next, click Change advanced power settings in the bottom.

  6. Expand sleep in the Advanced settings window then click on System unattended sleep timeout.

  7. Change the value of this field to 30 minutes (Default may 2 or 4 minutes, causing the problem).

  8. Click Apply, followed by OK. Reboot your PC to save changes.

Method 4: Change Screen Saver Time

  1. Right-click on the empty area on the desktop then selects Personalize.

  2. Now select Lock screen from the left menu and then click Screen saver settings.

  3. Now set your screen saver to come on after a more reasonable amount of time (Example: 15 minutes).

  4. Click Apply, followed by OK. Reboot to save changes.

Method 5: Use PowerCfg.exe utility to configure display timeout

  1. Press Windows Key + X then select Command Prompt (Admin).

  2. Type the following commands in the cmd and hit Enter after each one: Important: Change the value

Note: The VIDEOIDLE timeout is used when the PC is unlocked, and the VIDEOCONLOCK timeout is used when the PC is on the locked screen.

  1. Now the above commands were for when you are using plugged in charging for Battery use these commands instead:

  2. Close everything and reboot your PC to save changes.

Recommended:

Fix REGISTRY_ERROR Blue Screen Errors How to Fix Windows 10 not using full RAM 7 Ways To Fix Windows 10 Slow Shutdown Fix Windows Update Database Corruption Error

That’s it you have successfully Fix Windows 10 Sleeps after few minutes of Inactivity but if you still have any queries regarding this post feel free to ask them in the comment’s section.